Levoite™ Bevel Block Gauge

DESCRIPTION :

Whether you' re marking dovetails, taking off an angle from an antique, or transferring an angle from a plan, you want a bevel gauge that adjusts easily, locks firmly and won' t move again until you want it to.

Bevel Block Gauge, aluminum alloy angle finder universal bevel protractor for protractor woodworking tools angles for 1:6, 1:7 and 1:8 dovetails, miter angles of 15°, 22-1/2°, 30°, 36° and 45°.

FEATURES :

• The Bevel Block set dovetail and miter angles faster, easier.
• The Bevel Block instantly gives you angles for 1:6, 1:7 and 1:8 dovetails, and miter angles of 15°, 22-1/2°, 30°, 36°and 45°. With the geometry of the Bevel Block you always have both the 90° complement and the 180° supplement to each of those angles by simply changing the surface you?re holding the bevel square against. That gives you twenty-four different physical references.
• Angle Complement and Angle Supplement All-in-One Simple Block,Set the angles by holding the right side of the Bevel Block against your bevel square' s base and adjust the blade to match your desired angle. It' s that easy and that perfect
• Switch the side that is against your bevel square from the right side to the bottom and you' II get the 90° complements to all the angles. This technique is perfect for laying out shelf braces and other projects where you need the total of two cuts to equal 90°
• Supplementary angles are particularly helpful at the table saw. It' s hard to see a narrow 45° angle between the saw blade and the table, but on the other side of the blade, the 135° angle is wide open and easy to see. Set the right side of the Bevel Block on your saw table and adjust your bevel square to the supplementary angle. Now you can set your saw for a bevel cut faster and easier than ever before.

SPECIFICATION :
Material: Aluminum Alloy
Size: 25.4*63.5*38mm/1*2.5*1.5"
Color: Red